Authors : Taha Abdulwahid MAHMOOD

Volume/Issue : Volume 9 - 2024, Issue 8 - August

Google Scholar : https://tinyurl.com/bpadvth5

Scribd : https://tinyurl.com/mrrcrye7

DOI : https://doi.org/10.38124/ijisrt/IJISRT24AUG1412

Abstract : This study provides a comprehensive analysis of earthing systems as defined by international standards. It involves the calculation of fault currents and contact voltages, the selection of suitable electrical protection for each system type, and an evaluation of the currently implemented systems. The research highlights the distinctions in system performance, focusing on supply continuity and the corresponding protection mechanisms. It also addresses methods for defining neutral points in both high and low voltage networks. Furthermore, the study examines the effectiveness of protective devices during ground faults, including the implications of unearthed neutral systems. Both existing and proposed methods of protection are discussed, with particular emphasis on the utilization of derivatives of transient waves for safeguarding against atmospheric disturbances. The role of earthing in ensuring public safety during work on electrical equipment is explored, addressing the prevention of direct and indirect contact, protection against overcurrent and overvoltage, mitigation of electric shock risks, and safeguarding of both personnel and equipment from electrical discharges. This research incorporates international standards and measurements, applying them to grounding systems used globally. The findings lead to scientific, economic, and safety-related conclusions, culminating in recommendations for the optimal use of grounding devices across various settings.

Keywords : Electrical Safety, Earthing System, Grounding, Protection, Neutral Point.

References :

1. Dhahir, K. Shallow Geoelectric Sounding Application For Earthing Purpose In AL Diwaniayah Electric East-Substation Site/South of Iraq.‏
2. Al-bayaty, H., Kider, M. S., Jasim, O. N., & Shakor, A. (2022). Electrical distribution grid of Kirkuk City: A case study of load flow and short circuit valuation using ETAP. Periodicals of Engineering and Natural Sciences, 10(3), 311-322.‏
3. Calin Barbulescu, Silviu Kilyeni, and Tiberiu Tudorache, "Grounding Systems: Electrical and Safety Aspects," in Proceedings of the 2017 International Conference on Modern Power Systems (MPS), Cluj-Napoca, Romania, 2017, pp. 1-6.
4. IEEE Std 142-2007, "IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems."
5. Ali Shoshan, A. A., & Haseeb, Q. S. (2019). Analysis and reduction of energy consumption in educational buildings: A case study in the college of education for pure sciences at the University of Kirkuk. International Journal of Civil Engineering and Technology, 10(03).‏
6. IEC 60364-5-54, "Electrical Installations of Buildings - Part 5-54: Selection and Erection of Electrical Equipment - Earthing Arrangements and Protective Conductors."
7. Syed A. Rahman, "Grounding Systems for Power Distribution," IEEE Transactions on Industry Applications, vol. 20, no. 3, pp. 634-642, 1984.
8. Takis Koutsolampros and Panagiotis Georgilakis, "Fault Current and Touch Voltage Calculations for Grounding Systems," IEEE Transactions on Power Delivery, vol. 21, no. 3, pp. 1458-1465, 2006.
9. IEC 60909-0, "Short-Circuit Currents in Three-Phase AC Systems - Part 0: Calculation of Currents."
10. IEEE Std 81-2012, "IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System."
11. Jose Carrillo and Enrique Acha, "Economic Impact of Grounding System Selection on Power Distribution Networks," IEEE Transactions on Power Systems, vol. 16, no. 1, pp. 39-45, 2001.
12. Elahi Sharifi and Mehdi Sanaye-Pasand, "On the Selection of Grounding System for Power Distribution Networks," IEEE Transactions on Power Delivery, vol. 24, no. 2, pp. 1019-1027, 2009.
13. IEEE Industry Applications Society. Power System Technologies Committee. (1982). IEEE recommended practice for grounding of industrial and commercial power systems (Vol. 142, No. 1982). Institute of Electrical & Electronics Engineers (IEEE).‏
14. Kothari, D. P., & Nagrath, I. J. (2004). Modern Power System Analysis (3rd ed.). McGraw-Hill Education.
15. Stevenson, W. D. (2010). Elements of Power System Analysis (4th ed.). McGraw-Hill Education.
16. Liu, K., Zhang, S., Li, B., Zhang, C., Liu, B., Jin, H., & Zhao, J. (2021). Flexible grounding system for single-phase to ground faults in distribution networks: a systematic review of developments. IEEE Transactions on Power Delivery, 37(3), 1640-1649.‏