Stress and Deflection Analysis of Cantilever Beam by Numerically


Authors : Daw Thanda Aye, Daw Aye Myint Thwe

Volume/Issue : Volume 5 - 2020, Issue 4 - April

Google Scholar : http://bitly.ws/9nMw

Scribd : https://bit.ly/2WjtRGY

Abstract : - This study focus on the stress and deflection of a cantilever beam under 5kN load. It consists of a finite element model to the rectangular-shaped crosssection. The area of this beam is 0.2 x 0.3 m and the length is 1 m. For this purpose, a cantilever beam with the only deflection in one direction is used. The whole study, modeling, and behavior of structural cantilever beam for loading and boundary conditions are performed on the Solidwork.

Keywords : Finite Element Model, Stress, Deflection, Solidwork

- This study focus on the stress and deflection of a cantilever beam under 5kN load. It consists of a finite element model to the rectangular-shaped crosssection. The area of this beam is 0.2 x 0.3 m and the length is 1 m. For this purpose, a cantilever beam with the only deflection in one direction is used. The whole study, modeling, and behavior of structural cantilever beam for loading and boundary conditions are performed on the Solidwork.

Keywords : Finite Element Model, Stress, Deflection, Solidwork

Never miss an update from Papermashup

Get notified about the latest tutorials and downloads.

Subscribe by Email

Get alerts directly into your inbox after each post and stay updated.
Subscribe
OR

Subscribe by RSS

Add our RSS to your feedreader to get regular updates from us.
Subscribe